LEAVE NO GAPS
PenoLock is a suite of adaptive passive fire stopping systems specifically created for timber and steel elements penetrating fire walls. Quick and easy to install, this intumescent system keeps a low profile.
Designed to make your passive fire installations easier than ever before
As easy as 1-2-3
Our systems comes to you with all components on demand - packed up and ready to use on site.
No more shopping for bits needed.
Clean & Waste free
We deliver pre-cut pattresses where required. No more cutting of batts or alike. Just slide onto the purlin and coat. Done.
Cost & Time effective
With a one coat application, no need for an annular gap or solid blocking, you are quicker to install, finish and hand-over to other trades.
Guaranteed Compliance
PenoLock’s purposefully aligned components achieve a fire resistance rating of up to -/60/60, tested to AS1530.4
PenoLock is an easy to install fire stopping system that has a low overall profile.
PenoLock is a suite of passive fire stopping systems for timber and steel elements penetrating fire walls. PenoLock’s purposefully aligned components achieve a fire resistance rating of up to -/60/60.
The active component in these systems is a sustainable, water-borne, low-VOC, thin film intumescent, which is formulated to the highest standards and provides optimal fire protection in interaction with the other system elements.
PenoLock timber & PenoLock Steel both come as a on demand kit solution.
The PenoLock Kit Solution
Both, Steel & Timber Penentration Kits include:
• Waterborne, thin-film intumescent
• Mastic
• Wet-film comb
Additionally, the Steel Penetration Kit includes:
• Primer
• Ceramic fibre
• Pre-cut pattress
• Screws
Single Coat Application
No need for annular gap or solid blocking
Easy Quality Control - Wet-Film Coat Check
Pre-Cut mattresses for steel penetrations
STEEL PENETRATIONS
Steel C Section Purlins
TIMBER PENETRATIONS
Purlins, Trusses, Joists
FBL-100
Product Data Sheet
PDF DOWNLOAD
FBL-100
Safety Data Sheet
PDF DOWNLOAD
PenoLock Steel
-/60/60 Drawing
PDF DOWNLOAD
PenoLock Timber
-/30/30 Drawing
PDF DOWNLOAD
PenoLock Timber
-/60/60 Drawing
PDF DOWNLOAD
Timber Penetrations
TRUSSES / PURLINS / JOISTS
We offer a 30 min and a 60 min fire rated system, installed in just two simple steps: Simply seal with mastic and a single layer of our intumescent coating to achieve your required FRR.
Our solution for timber penetrations works for installations with combustible and non- combustible substrates.
RECOMMENDED FOR:
New builds, upgrades, remediation
Steel
Penetrations
C-SECTION PURLINS
We offer a 60 min fire rated system.
To make installation fast, easy and clean, we deliver pre-cut plasterboard pattresses and ceramic fibre patches, to your requirements. An added seal of mastic and a single layer of our intumescent coating guarantees you achieve the required FRR.
RECOMMENDED FOR: New builds, upgrades, remediation
Independent Third party Fire Tested
We test all our systems on local materials to AS1530.4
Related Casestudy:
Retirement Village
Invercargill
A floor plan change in two of the main buildings involved moving fire walls. Upgrading the passive fire stopping needed to be quick & noise free, with the occupants on site.
Want to know how our solution fits your project?
We’ve got you covered.